New book raises alarm on sudden death of athletes “Heat Stress”

August 2nd, 2011

New book raises alarm on sudden death of athletes

Miami Herald Staff and wire reports

With the sudden death last week of a 17-year-old Miramar High football player during an offseason workout with the temperature near 90 degrees, a new book on sudden cardiac death is mandatory reading for all who train in South Florida’s steamy weather.

Preventing Sudden Death in Sport and Physical Activity — has three chapters on this subject. One is for student athletes, one for older athletes and one on commotio cordis, death from an otherwise innocuous blow to the sternum. There are chapters on heatstroke, brain injuries, asthma, cervical spine injury and even lightning.

Between 1982 and 2009, there were 756 deaths from all causes among high school and college athletes. The vast majority were high school athletes, many of them football players.

For example, only about half of all high schools have athletic trainers on staff, usually because of budgetary constraints, according to Douglas Casa, who edited the book, though many schools somehow find the money to pay several football coaches.
Visit http://mistingdirect.com for portable site line mist cooling portable fans.

As high school football players head back to the fields this August, “that should scare … any parent in America,” Casa said.

In the case of Isaiah Laurencin, the Miramar High offensive lineman who died on Wednesday morning after participating in football drills Tuesday evening, a trainer was not present although the head coach was. Trainers are only required when formal football practices begin, which can’t start before Aug. 8, according to the rules governing Florida high school sports. Laurencin was participating in a workout, not a practice. In a workout, students do not wear helmets and pads, but run drills in shorts and T-shirts.

According to the 911 call, made at 8:08 p.m. last Tuesday, an adult from the back of the school’s parking lot said he had “a player, 17 years of age, black male, who appeared severely dehydrated, having a lot of body cramps” and indicated that Isaiah had been given “Gatorade and water but that he was having problems breathing.”

An autopsy was performed Thursday, but the cause of death remains under investigation, pending test results that aren’t expected for 90 to 120 days. Both school and statewide student athletic officials are investigating what happened and whether changes need to be made to high school athletic policies.

Casa’s organization, the Korey Stringer Institute, says only one state, New Jersey, follows guidelines for acclimating high school athletes after a summer off. The institute was named for the Minnesota Vikings offensive lineman who collapsed and died of heat stroke in 2001.

At the college level, the NCAA only recently began testing for “exertional sickling,” an inherited condition that affects red blood cells and was the leading cause of death among Division I college football players over the past decade. The condition can be linked to exertional rhabdomyolysis, a dangerous breakdown of skeletal muscle tissue found in 13 University of Iowa football players who were hospitalized in January after a strenuous offseason workout. Mist cooling fans are great to prevent heat stress! Learn more at

So many of the fatalities were preventable — if adequate preparations had been made and responders reacted appropriately in the first few minutes, the book points out. That includes figuring out what went wrong, even though symptoms of various conditions appear similar.

Read more: http://www.miamiherald.com/2011/07/29/2340490/new-book-raises-alarm-on-sudden.html#ixzz1Tt821sxK

PREVENT HEAT STRESS WITH MISTI COOLING FAN

Misting system with stainless steel mist tubing.

April 10th, 2011

All of our high pressure compression misting fittings can be used with our type 316 stainless steel mist tubing. This tubing can be covered with stucco, act as a permanent feed line or left exposed for a designer look. We have both 1/4″ and 3/8″ stainless steel tubing for use an any high pressure misting system. With the use of a tubing bender our stainless mist line can be bent on-site. When this tubing is used with our double ferrule compression fittings a reliable, permanent connection is made. It is essential when installing misting tubing that will be embedded in stucco or installed in an inaccessible space to pressure test and leak check the entire misting system before covering.

A misting nozzle can be installed anywhere desired by cutting the mist tubing with a tubing cutter and installing an inline nozzle adapter. With our compression misting fittings including tees, elbows and couplings our stainless steel mist tubing can be installed in any configuration and can be used for many different applications.

Our staff has installed miles of stainless steel mist tubing and we will be happy to answer any questions about installing stainless steel mist tubing. We will even help you design a high pressure misting system for free. Call Now! http://mistingdirect.com/info.html

New portable high pressure outdoor cooling system is available!

July 22nd, 2010

Our new portable outdoor cooling system is the most compact and easy to use high pressure misting system available. Simply connect a garden hose, plug it in and you have a complete high pressure mist cooling system with a 3-speed, high velocity mist fan. This unit can be used for heat remediation, to cool parties and outdoor events and even for spot cooling in warehouses and on job sites. A built in 1 micron filter keeps the nozzles from clogging and makes set up a snap. This is a true 1000 psi max high pressure mist cooling system and comes with a 404 stainless steel pump housing. This pump can run up to 3 additional outdoor cooling misting fans.

New portable high pressure outdoor cooling system is available! » Portable High Pressure Mist Cooling System

Portable High Pressure Mist Cooling System

Portable High Pressure Mist Cooling System
Portable High Pressure Mist Cooling System

Outdoor Cooling Systems

Our new high pressure mist cooling pump now comes in a 404 stainless steel enclosure! The 404 stainless steel enclosure will protect your pump for many years to come.

This .25 gallon per minute, 1000 PSI misting pump is the most efficient high pressure misting pump on the market drawing only 1.4 Amps at full load! It is also whisper quiet and built to last.

New! Misting Ruby Nozzles.

July 13th, 2010

Check out our new stainless steel mist cooling nozzles w/ real ruby orifices. Ruby doesn’t wear down from the friction of the high pressure water so these nozzles may be the last nozzles you ever buy. The nozzles come with a built in anti-drip vavle and a removable turbine. All of the ruby nozzles can be easily disassembled and completely cleaned!

The ruby nozzles produce the nicest cone of mist that we have seen.

One of the problems with high pressure misting systems is that the orifice of the misting nozzles is so small that over time they can become clogged. Our ruby misting nozzles can be easily taken apart and cleaned. Our ruby misting nozzles can be used with any high pressure misting system with that uses mist nozzles with 10/24 thread.

Heat Wave: A Major Summer Killer. Get Ready For Hot Summer With Mist Cooling Systems. Cool Any Outdoor Area Up To 20 Degrees!

June 4th, 2010

Heat Wave: A Major Summer Killer

A National Problem

Heat kills by taxing the human body beyond its abilities. In a normal year, about 175 Americans succumb to the demands of summer heat. Among the large continental family of natural hazards, only the cold of winter-not lightning, hurricanes, tornadoes, floods, or earthquakes-takes a greater toll. In the 40-year period from 1936 through 1975, nearly 20,000 people were killed in the United States by the effects of heat and solar radiation. In the disastrous heat wave of 1980, more than 1,250 people died.

And these are the direct casualties. No one can know how many more deaths are advanced by heat wave weather-how many diseased or aging hearts surrender that under better conditions would have continued functioning.

North American summers are hot; most summers see heat waves in one section or another of the United States. East of the Rockies, they tend to combine both high temperature and high humidity although some of the worst have been catastrophically dry.

NOAA’s National Weather Service Heat Index Program

Considering this tragic death toll, the National Weather Service (NWS) has stepped up its efforts to alert more effectively the general public and appropriate authorities to the hazards of heat waves-those prolonged excessive heat/humidity episodes.

Based on the latest research findings, the NWS has devised the “Heat Index” (HI), (sometimes referred to as the “apparent temperature”). The HI, given in degrees F, is an accurate measure of how hot it really feels when relative humidity (RH) is added to the actual air temperature.

To find the HI, look at the Heat Index Chart. As an example, if the air temperature is 95°F (found on the left side of the table) and the RH is 55% (found at the top of the table), the HI-or how hot it really feels-is 110°F. This is at the intersection of the 95° row and the 55% column.

IMPORTANT: Since HI values were devised for shady, light wind conditions, EXPOSURE TO FULL SUNSHINE CAN INCREASE HI VALUES BY UP TO 15°F. Also, STRONG WINDS, PARTICULARLY WITH VERY HOT, DRY AIR, CAN BE EXTREMELY HAZARDOUS.

Heat Index/Heat Disorders: Possible heat disorders for people in higher risk groups.

Heat Index of 130° OR Higher: HEATSTROKE/SUNSTROKE HIGHLY HIGHER LIKELY WITH CONTINUED EXPOSURE,

Heat Index of 105°- 130°: SUNSTROKE, HEAT CRAMPS OR HEAT EXHAUSTION LIKELY, AND HEATSTROKE POSSIBLE WITH PROLONGED EXPOSURE AND/OR PHYSICAL ACTIVITY.

Heat Index of 90°- 105°: SUNSTROKE, HEAT CRAMPS AND HEAT EXHAUSTION POSSIBLE WITH PROLONGED EXPOSURE AND/OR PHYSICAL ACTIVITY.

Heat Index of 80° – 90°: FATIGUE POSSIBLE WITH PROLONGED EXPOSURE AND/OR PHYSICAL ACTIVITY

Note on the HI chart the shaded zone above 105°F. This corresponds to a level of HI that may cause increasingly severe heat disorders with continued exposure and/or physical activity.

The “Heat Index vs. Heat Disorder” table (next to the HI chart) relates ranges of HI with specific disorders, particularly for people in higher risk groups.

Summary of NWS’s Alert Procedures

The NWS will initiate alert procedures when the HI is expected to exceed 105°- 1 10°F (depending on local climate) for at least two consecutive days. The procedures are:

* Include HI values in zone and city forecasts.
* Issue Special Weather Statements and/or Public Information Statements presenting a detailed discussion of
o Extent of the hazard including HI values
o Who is most at risk
o Safety rules for reducing the risk.
* Assist state/local health officials in preparing Civil Emergency Messages in severe heat waves. Meteorological information from Special Weather Statements will be included as well as more detailed medical information, advice, and names and telephone numbers of health officials.
* Release to the media and over NOAA‘s own Weather Radio all of the above information.

How Heat Affects the Body Human

Human bodies dissipate heat by varying the rate and depth of blood circulation, by losing water through the skin and sweat glands, and-as the last extremity is reached-by panting, when blood is heated above 98.6 degrees. The heart begins to pump more blood, blood vessels dilate to accommodate the increased flow, and the bundles of tiny capillaries threading through the upper layers of skin are put into operation. The body’s blood is circulated closer to the skin’s surface, and excess heat drains off into the cooler atmosphere. At the same time, water diffuses through the skin as perspiration. The skin handles about 90 percent of the body’s heat dissipating function.

Sweating, by itself, does nothing to cool the body, unless the water is removed by evaporation, and high relative humidity retards evaporation. The evaporation process itself works this way: the heat energy required to evaporate the sweat is extracted from the body, thereby cooling it. Under conditions of high temperature (above 90 degrees) and high relative humidity, the body is doing everything it can to maintain 98.6 degrees inside. The heart is pumping a torrent of blood through dilated circulatory vessels; the sweat glands are pouring liquid-including essential dissolved chemicals, like sodium and chloride onto the surface of the skin.

Too Much Heat

Heat disorders generally have to do with a reduction or collapse of the body’s ability to shed heat by circulatory changes and sweating, or a chemical (salt) imbalance caused by too much sweating. When heat gain exceeds the level the body can remove, or when the body cannot compensate for fluids and salt lost through perspiration, the temperature of the body’s inner core begins to rise and heat-related illness may develop.

Ranging in severity, heat disorders share one common feature: the individual has overexposed or over exercised for his age and physical condition in the existing thermal environment.

Sunburn, with its ultraviolet radiation burns, can significantly retard the skin’s ability to shed excess heat. Studies indicate that, other things being equal, the severity of heat disorders tend to increase with age-heat cramps in a 17-year-old may be heat exhaustion in someone 40, and heat stroke in a person over 60.

Acclimatization has to do with adjusting sweat-salt concentrations, among other things. The idea is to lose enough water to regulate body temperature, with the least possible chemical disturbance.

Cities Pose Special Hazards

The stagnant atmospheric conditions of the heat wave trap pollutants in urban areas and add the stresses of severe pollution to the already dangerous stresses of hot weather, creating a health problem of undiscovered dimensions. A map of heat-related deaths in St. Louis during 1966, for example, shows a heavier concentration in the crowded alleys and towers of the inner city, where air quality would also be poor during a heat wave.

The high inner-city death rates also can be read as poor access to air-conditioned rooms. While air conditioning may be a luxury in normal times, it can be a lifesaver during heat wave conditions.

The cost of cool air moves steadily higher, adding what appears to be a cruel economic side to heat wave fatalities. Indications from the 1978 Texas heat wave suggest that some elderly people on fixed incomes, many of them in buildings that could not be ventilated without air conditioning, found the cost too high, turned off their units, and ultimately succumbed to the stresses of heat

Preventing Heat-Related Illness

Elderly persons, small children, chronic invalids, those on certain medications or drugs (especially tranquilizers and anticholinergics), and persons with weight and alcohol problems are particularly susceptible to heat reactions, especially during heat waves in areas where a moderate climate usually prevails.

Heat Wave Safety Tips

Slow down. Strenuous activities should be reduced, eliminated, or rescheduled to the coolest time of the day. Individuals at risk should stay in the coolest available place, not necessarily indoors.

Dress for summer. Lightweight light-colored clothing reflects heat and sunlight, and helps your body maintain normal temperatures.

Put less fuel on your inner fires. Foods (like proteins) that increase metabolic heat production also increase water loss.

Drink plenty of water or other non-alcohol fluids. Your body needs water to keep cool. Drink plenty of fluids even if you don’t feel thirsty. Persons who (1) have epilepsy or heart, kidney, or liver disease, (2) are on fluid restrictive diets or (3) have a problem with fluid retention should consult a physician before increasing their consumption of fluids.

Do not drink alcoholic beverages.

Do not take salt tablets unless specified by a physician.

Spend more time in air-conditioned places. Air conditioning in homes and other buildings markedly reduces danger from the heat. If you cannot afford an air conditioner, spending some time each day (during hot weather) in an air conditioned environment affords some protection.

Don’t get too much sun. Sunburn makes the job of heat dissipation that much more difficult
Know These Heat Disorder Symptoms

SUNBURN: Redness and pain. In severe cases swelling of skin, blisters, fever, headaches. First Aid: Ointments for mild cases if blisters appear and do not break. If breaking occurs, apply dry sterile dressing. Serious, extensive cases should be seen by physician.

HEAT CRAMPS: Painful spasms usually in muscles of legs and abdomen possible. Heavy sweating. First Aid: Firm pressure on cramping muscles, or gentle massage to relieve spasm. Give sips of water. If nausea occurs, discontinue use.

HEAT EXHAUSTION: Heavy sweating, weakness, skin cold, pale and clammy. Pulse thready. Normal temperature possible. Fainting and vomiting. First Aid: Get victim out of sun. Lay down and loosen clothing. Apply cool, wet cloths. Fan or move victim to air conditioned room. Sips of water. If nausea occurs, discontinue use. If vomiting continues, seek immediate medical attention.

HEAT STROKE (or sunstroke): High body temperature (106° F. or higher). Hot dry skin. Rapid and strong pulse. Possible unconsciousness. First Aid: HEAT STROKE IS A SEVERE MEDICAL EMERGENCY. SUMMON EMERGENCY MEDICAL ASSISTANCE OR GET THE VICTIM TO A HOSPITAL IMMEDIATELY. DELAY CAN BE FATAL. Move the victim to a cooler environment Reduce body temperature with cold bath or sponging. Use extreme caution. Remove clothing, use fans and air conditioners. If temperature rises again, repeat process. Do not give fluids. Persons on salt restrictive diets should consult a physician before increasing their salt intake.

*For more information contact your local American Red Cross Chapter. Ask to enroll in a first aid course.

Produced as a cooperative effort of NOAA’s National Weather Service, the Federal Emergency Management Agency, and the American Red Cross. NOAA/PA 85001

Aeroponic Farming

April 28th, 2010

DIY Aeroponic 1000 PSI Kit

We have designed the first truly high pressure commercial duty aeroponics pump. This system actually contains two pumps, a high pressure triplex plunger pump with a continuous duty motor and a low pressure filtration pump. This system is capable of drawing nutrient solution from a reservoir and pressurizing it to up to 1000 PSI at a maximum of one gallon per minute. A built in adjustable pressure regulator allows the pressure to be set anywhere from 60 PSI to 1000 PSI. Comes complete with triple stage low surface area filtration and versatile timer that we have designed exclusively for the aeroponics industry.

When creating mist at high pressures the nutrient solution is atomized into extremely tiny droplets, this allows for maximum oxygen absorption and delivery to the roots.

Buy aeroponic system at www.MistingDirect.com

Mist Fans or Mist Line? That is the question.

March 30th, 2010

DIY high pressure misting kit for LESS.

When choosing a mist system, one has to decide whether to use mist fans, mist line or a combination of the two.

Our high pressure mist cooling fans evaporate 100% of the mist and circulates the air to provide maximum cooling. It is not uncommon to see temperature drops of 16-25 degrees! Mist cooling fans are the most effective way to cool an area!

If electrical outlets for the fan are not nearby or if you would prefer not to see a mist cooling fan than mist line or misting stakes are for you.

Mist line is usually installed along the outside perimeter of covered patios, awnings, gazebos etc. A high pressure mist cooling system evaporates the tiny water droplets in the air cooling the air without getting anything wet. This causes a curtain of cool air surrounding you.

No structure, no problem. High pressure mist cooling/fog effects stakes can be hidden in landscaped areas. When a perimeter oh high pressure mist is created around an area, no matter which way the wind blows, the cool air will move through the target area. When there is no wind the air will mix and still cool the target area.

Feel free to contact us with questions if you are designing a high pressure misting system.

Mosquito Control and Prevention

March 12th, 2010


MOSQUITO CONTROL SYSTEMS

Biting insect prevent many of us from enjoying the outdoors.

Our mosquito control systems provide quick and lasting protection from annoying flying insects.

At timed intervals, the system releases a fine mist of a natural Pyrethrum-based insecticide that repels and kills mosquitoes, fleas, spiders, wasps & other biting insects.

Pyrethrum is a natural water based insecticide derived from the Chrysanthemum flower. Pyrethrum is family and pet-friendly, used for over 25 years.

MistAway systems operate automatically and are easily adjustable to meet your needs. Great for backyards, patios, pools, gazebos, tennis courts, play areas, restaurants, country clubs, resorts, sports courts, barns and more.

Let us help you design a system to meet your needs.
Mosquito diseases have become more of a growing concern over the past decade or so.

They also can bring disease. That’s right, mosquito diseases. West Nile Mosquito Virus, a transferable mosquito disease, run daily on the news, people need to be educated and prepared. Thankfully with the help of products like DEET spray and mosquito traps, everyone can rest assured that their barbeques and picnics will continue to be safe ones this year.
Mosquito Borne Illness you say? Oh My God, Where Can I Get One?

There once was a time when the answer to that question would be, who knows? Now the answer is, maybe in your own backyard. Fortunately for all, fewer than 100 of the world’s known 2,700 mosquito species actually carry disease. But with those 100 species buzzing around with their annoying mosquito sound, there are still 100 mosquito species that humans, birds, and all other animals have to worry about.

What Diseases Can A Mosquito Carry?
* Arboviral Encephilitides
* Dengue Fever
* Malaria
* West Nile Virus
* Yellow Fever

Of course, that is not to say that every bite will be traumatic or lethal. Most mosquito bites are nothing but annoying. However, in a time when there are so many diseases, it is best to protect yourself the best you can to ensure that you don’t become the next victim of a mosquito borne illness.
Arboviral Encepha… what?

While the term Arboviral Encephilitiedes may sound ridiculous, any time you hear the phrase Arboviral Encephilitides mosquito borne illness you should be concerned. Encephilitides are viral diseases transferred by mosquitoes that can cause inflammation of the brain. In extreme cases, this inflammation eventually can lead the infected person to experience brain damage, fall into a coma, or even meet death.

Brain damage and death is the total extreme when it comes to these diseases. Most infected persons end up with less minor flu-like symptoms which include:

* Headaches
* Muscle Aches
* Fever
* Malaise

For most, symptoms never even surface. For some, the symptoms are much more extreme than flu-like. Those are the people who need to seek treatment, especially if they experience the following:

* High Fever
* Confusion
* Stiff Back
* Stiff Neck
* Sensitivity to Light
* Vomiting

There are a few varieties of Encephalitides found in the United States. These varieties include:

* Eastern Equine Encephalitis
* Western Equine Encephalitis
* St. Louis Encephalitis
* La Crosse Encephalitis (LAC)
* West Nile Encephalitis

Out of all these varieties of mosquito illnesses, the Eastern Equine is viewed as the most deadly. Even with only an average of four deaths a year in the United States, it is one of the mosquito illnesses that could someday affect a much larger portion of the population.
I’ll Take A Mosquito Da Dengue to Go Please…..

Mosquito Dengue, sounds like a dish doesn’t it? Not even close. Dengue Fever is a real thing that is commonly associated with mosquitoes found in the tropics. It can provide the infected with as little as a few days worth of sickness or provide them a horrid, fatal blood disease. The mosquitoes that carry this disease are known as Aedes Aegypti and find humans as their preferable targets. This day-eating, domestic insect’s feeding habits are the reason that it is so easily kept in a constant cycle and why there is no vaccine for anyone who has contracted anything by a Dengue mosquito. That is just one more reason to protect yourself and make sure you buy the best mosquito traps or repellents that money can buy.
Did you just say Mosquito Malaria?

While many might think that Malaria is not something that they have to worry about, that is not the case when it comes to mosquitoes. Hundreds of millions of people contract it each year and at least a million of those people die from it. This is especially true for children who are infected. Like Dengue Fever, there is no vaccine available to fight this disease causing it to be one of the most feared mosquito viruses in the world.

A Malaria mosquito can cause a person to have a few different symptoms. These symptoms can start as a simple fevers or body aches that eventually can lean to seizures, a coma, or even death. Largely found in areas of Central America, South America, Africa, Asia, Eastern Europe, the South Pacific, and Hispaniola, it seems like only a matter of time before this mosquito disease finds a large home for itself in North America. Unlike the common misconception that the mosquito and H.I.V. are somehow connected, the mosquito and Malaria can be a deadly combination for anyone who comes into contact.

Asian Tiger Mosquito – Carrier of the West Nile Virus
Asian Tiger Mosquito – Carrier of the West Nile Virus
A West Nile Mosquito in America?

The term West Nile mosquito or mosquito West Nile Virus does not mean that one must travel to the other side of the world to come into contact with this insect. Year after year, it seems like more and more West Nile mosquito bite cases are popping up all over the United States. Now viewed as a seasonal epidemic in North America, summer and fall seem to be the times when it shines.

First making an appearance in North America in 1999, coming with reports of infected humans and horses, it claimed 18 lives in its first year. Reports show that there were 3,598 humans infected with the mosquito West Nile Virus by the year 2007. While not everyone who is infected by a diseased mosquito’s bite will meet death, at least 200 of those people are expected to develop some type of serious illness.

Everyone should protect themselves from the possibility of the West Nile Virus. A constant awareness of one’s surroundings should assist in that protection. This is even truer for children and for those over 50. The older or younger one is, the more susceptible they are to this growing deadly disease.
Yellow Fever VS Dance Fever

Dance fever sounds like a much better thing to have than Yellow Fever and that is for good reason. Yellow fever is another tropical disease that transfers itself from mosquito to human. It is a constant cycle that goes directly from mosquito to human and then back again. One bite from a yellow fever mosquito and a person could have to kiss their health goodbye.

This is not always the case. In some instances, this disease may just cause a few days of unpleasantness, while in other instances, the infected do end up dying before their time. Found only in Africa and South America, travelers should definitely get their immunization shots before even thinking about coming into to contact with these crazed mosquitoes.

There is much information known about Yellow Fever mosquitoes. They have adapted to living amongst people in city and towns and breed wherever there is a cool place close to human habitats. Often, these places include:

* Flower Pots
* Discarded Tires
* Oil Drums
* Water Containers

These city yellow fever mosquitoes have been the reason for the classification of Urban Yellow Fever, which is the yellow fever most commonly found today. It is not common for United States travelers to come back with reports of obtaining Yellow Fever, but that does not mean it cannot happen. It also does not mean that the disease will never travel. Like the West Nile Virus, there is the chance that Yellow Fever or any of other mosquito diseases foreign to the United States will someday reach this, or any other area.

A Mega-Catch Mosquito Trap
A Mega-Catch Mosquito Trap
How Do I Protect Myself?

How do I protect myself is a question that has probably been replaying over and over in your head since the beginning of this rush of information. You are already halfway there to keeping yourself safe. You have the information. Now all you have to do is make sure to keep you and your loved ones safe.

Some of the best mosquito traps and methods include:

* DEET spray
* Mosquito nets
* Citronella candles
* Garlic repellant
* high pressure mosquito control systems
* Mega-Catch Mosquito Traps

All of these products will keep you and your family safe. When you choose the best product for your needs, be sure to choose the one that will be the safest and most convenient. For instance, mosquito nets are helpful, but you will only be safe while you are under the net. For constant protection, it may be best to use a product like a Mega-Catch Mosquito Trap so you and your family can be protected from mosquito bites and mosquito diseases all day and night.

External Mosquito Links of Interest

* About Mosquito Diseases
The best defense against mosquito bourne diseases is to become educated about them and find ways to control the mosquito population.
* Mosquito Diseases
More about mosquito bourne diseases
* Mosquito – Wikipedia, the free encyclopedia
* Mosquito-Borne Diseases
More on mosquito diseases by The National Center for Infectious Diseases.

Animal Stress: Dust , Odoor & Emissions .

February 11th, 2010

Source: TEXAS A&M UNIV submitted to
AIR QUALITY: ODOR, DUST, AND GASEOUS EMISSIONS FROM CONCENTRATED ANIMAL FEEDING OPERATIONS IN THE SOUTHERN GREAT PLAINS

PROJECT DIRECTOR: Sweeten, J. M. Auvermann, B. W. Parnell, C. B. Cole, N. A. Parker, D. B. Hargrove, W. L.

PERFORMING ORGANIZATION
AMARILLO-TAMU AGR RES CENTER
TEXAS A&M UNIV
COLLEGE STATION,TX 77843

NON TECHNICAL SUMMARY: Concentrated animal feeding operations (CAFO) in the semi-arid Southern Great Plains face air quality challenges, including odor and dust, ammonia (NH3), gaseous emissions, particulate matter (PM) emissions, and respiratory health of livestock. The scientific basis for selecting cost-effective abatement options and setting achievable emission factors for odor, odorous gases (odorants), NH3, hydrogen sulfide (H2S), volatile organic compounds (VOCs), and particulate matter (PM10 and PM2.5) is poorly developed for the CAFO industry and credible, scientific basis is needed. This project will provide critically-needed data and information that will (a) accurately characterize air quality emissions (odor, odorous gases, and particulate matter) from open lot beef feedlots and dairies; (b) help develop or evaluate cost-effective abatement strategies; and (c) assure sound databases for emission factor development.

OBJECTIVES:Objective 1. Emissions Measurement: Characterize air quality emissions from open-feedyard surfaces and holding ponds or lagoons using standardized field and laboratory measurement methods for PM (PM10 and PM2.5), odor, and selected gaseous emissions (NH3, H2S, VOCs). Objective 2. Effective Abatement Measures: Develop and evaluate cost-effective abatement measures for open-lot feeding systems for beef and dairy cattle in the Southern Great Plains. Objective 3. Scientific Basis for Emission Factors: Develop a scientific basis for emission factors for PM10, PM2.5, odor, and specific odorous gases for Southern Great Plains feedyards and related ground-level area sources. Objective 4. Animal Health & Performance: Determine the impact of feedyard air contaminants on animal health and productivity. Objective 5. Technology Transfer: Deliver education and technology transfer programs that address characterization and cost-effective abatement of airborne emissions, scientifically sound regulation of open-lot feedyards and dairies, and livestock health and performance.

APPROACH:Dust (particulate matter, PM), odor, and gaseous emissions from open-lot cattle feedlots and dairies in the semi-arid Southern Great Plains are a concern to producers, rural residents, and regulatory agencies. Science-based information to address these concerns is crucial as more stringent air quality standards are imposed. Faculty representing the Consortium for Cattle Feeding and Environmental Sciences, which includes Texas A&M University System components (Texas Agricultural Experiment Station, West Texas A&M University, and Texas Cooperative Extension), together with USDA-Agricultural Research Service (Bushland) and Kansas State University, will conduct coordinated research and technology transfer projects designed to address air quality issues. Research objectives include: measurement and characterization of dust, odor, and trace gas emissions; development and demonstration of cost-effective dust and odor abatement methods; development of scientific basis for improved emissions factors, including appropriate dispersion modeling; determine impact of emissions on cattle health and performance; and provide educational programs for improved air quality and waste management practices. To fulfill these objectives, scientists/engineers will monitor emissions and fluxes (odor, PM10, PM2.5, NH3, H2S, VOC) from manure and holding pond/lagoon surfaces at commercial cattle feedlots and open lot dairies in Texas and Kansas; conduct downwind monitoring of emission parameters from selected feedyards; evaluate alternative surface treatments; quantify PM and odor/odorant reductions from alternative manure management/harvesting practices; perform modeling to predict dust generation as a function of cattle hoof kinetics, manure moisture, and other factors on emissions; determine boundary-layer meteorology and evaporation on emissions factors and downwind transport; determine benefits of alternative abatement measures and effects of feedyard dust on arriving cattle performance. Air quality laboratories at West Texas A&M University (olfactometry), Texas Agricultural Experiment Station-Amarillo (chemical speciation of odorous gases and particulate matter), USDA-Agricultural Research Service (ammonia), Texas A&M University – Biological and Agricultural Engineering Department (particulate matter, H2S, ammonia), and Kansas State University (ammonia, particulate matter) will be utilized. Recommended values for allowable emission rates will be developed using the above measurements, dispersion modeling, and mass/energy balances. Interactions between particle size distribution and measured concentrations of PM10 and PM2.5 will be developed. Dispersion models will be adjusted to account for characteristics of particulates, H2S, and NH3 from feedyards and for non-Gaussian dispersion and plume rise.

CRIS NUMBER: 0192009 SUBFILE: CRIS
PROJECT NUMBER: TEX08904 SPONSOR AGENCY: NIFA
PROJECT TYPE: SPECIAL GRANT PROJECT STATUS: TERMINATED MULTI-STATE PROJECT NUMBER: (N/A)
START DATE: May 1, 2002 TERMINATION DATE: Apr 30, 2004

GRANT PROGRAM: AIR QUALITY, TEXAS
GRANT PROGRAM AREA: Special Research Grant

CLASSIFICATION
Knowledge Area (KA) Subject (S) Science (F) Objective (G) Percent
133 0410 2020 6.1 20%
306 3310 1060 2.2 10%
307 3310 2020 2.2 10%
402 0410 2020 2.1 20%
403 0410 3050 6.2 20%
404 0410 2070 2.1 10%
723 0410 2020 2.3 10%

CLASSIFICATION HEADINGS
KA723 – Hazards to Human Health and Safety
KA402 – Engineering Systems and Equipment
KA404 – Instrumentation and Control Systems
KA306 – Environmental Stress in Animals
KA307 – Animal Management Systems
KA403 – Waste Disposal, Recycling, and Reuse
KA133 – Pollution Prevention and Mitigation
S3310 – Beef cattle, live animal
S0410 – Air
F2020 – Engineering
F3050 – Law
F2070 – Meteorology and climatology
F1060 – Biology (whole systems)
G6.2 – Enhance Soil Quality for Productive Working Lands
G2.3 – Provide Risk Management and Financial Tools
G2.2 – Increase Efficiency of Production and Marketing Systems
G6.1 – Ensure Clean Water and Air
G2.1 – Expand Domestic Market Opportunities

RESEARCH EFFORT CATEGORIES
BASIC 15%
APPLIED 60%
DEVELOPMENTAL 25%

KEYWORDS: air pollution; air quality; ammonia; beef cattle; dairies; dairy cattle; dust; emissions; rate determination; feedlots; hydrogen sulfide; livestock production; odor; manures; particulate matter; volatile compounds; organic compounds; public policies; pollution control; environmental stress; production systems; agricultural engineering; measurement; cost effectiveness; performance evaluation; technology transfer; predictive models; recommendations

PROGRESS: May 1, 2002 TO Dec 31, 2002
Dust (particulate matter, PM), odor, and gaseous emissions from open-lot cattle feedlots and dairies in the semi-arid Southern Great Plains are a concern to producers, rural residents, and regulatory agencies. It is crucial to obtain science-based information to address these concerns with abatement measures and sound policies. We are conducting a coordinated 3-year research and technology transfer program to address these air quality issues. Major objectives (5) are: accurate characterization of dust, odor, and trace gas emissions; develop cost-effective abatement methods; develop scientific basis for improved emissions factors, including appropriate dispersion modeling; determine effects on cattle health and performance; and provide effective technology transfer programs. Coordinated research projects by Texas A&M University System components (TAES, WTAMU, TCE) and Kansas State University faculty include: monitoring of emissions and fluxes (odor, PM10, PM2.5, NH3, H2S, VOC) from open-lot facilities and holding pond/lagoon surfaces at cattle feedlots and dairies in Texas and Kansas; laboratory testing of alternative surface treatments; quantifying effectiveness of alternative management practices; physical modeling in test chambers to determine dust generation as a function of simulated cattle hoof kinetics; effects of surface manure characteristics on emissions; moisture evaporation loss from feedlot surfaces vs. climatic variables; economics of alternative abatement measures; and effects of feedyard dust on arriving cattle performance. Scientifically-sound emission rate values will be developed using the above measurements, dispersion modeling, and mass/energy balances. Progress highlights include: *Emissions Measurement — Cooperating feedyards/dairies were selected. Field sampling of emissions and climatic monitoring was initiated for: odor detection threshold, odorants, ammonia, hydrogen sulfide, and reactive volatile organic compounds. Continuous sampling capability was acquired for specific gases and PM. *Effective Abatement Measures — Flow-through weight-drop test chambers for evaluating PM emissions from simulated feedlot manure pads were constructed, with preliminary relationships established between kinetic energy imparted and feedlot dust concentrations. Preliminary evaporation rates from simulated undisturbed feedlot surface manure were measured using lysimeters. Ammonia emissions from simulated feedlot manure pads were measured. A water curtain system adjacent to a feedlot was tested for PM reduction. Chemical amendments for odor/gas emissions control were tested in the laboratory. *Scientific Basis for Emission Factors — Initial sampling trips to an open lot dairy and High Plains feedlots produced PM and ammonia results. Feedyard data showed a linear increase in TSP/PM10 ratios with time following rainfall. A new type of low-volume PM10 sampler was developed at TAMU. *Technology Transfer — An air quality project website was developed, an Industry Advisory Committee was appointed, and project-related publications and reports were prepared/presented. News releases included a seven-part radio interview series.

IMPACT: 2002-05-01 TO 2002-12-31 This multi-university, interdisciplinary project was launched in 2002. Laboratory and field experiments are underway. They will provide accurate emissions data with which to determine appropriate emission factors for open lot systems for beef cattle feedlots and dairies and will evaluate potential management methods for dust, odor, or specific odorous gases.

Dust control systems & DIY kits.
Free design & technical support.

http://mistingdirect.com

Got Misting Questions? We’ve Got Answers!

May 26th, 2009

Feel free to post your high pressure mist cooling questions here. You can also e-mail or call us if you prefer. We can even help you design your misting system and can answer any questions you may have about mist cooling systems.